Bearing cleaning the most primitive methods gasoline + kerosene. Today, social security, environmental protection, energy saving and increasing demands for large, water-based cleaning technology matures, costs are significantly reduced, and therefore, more and more people prefer water-based cleaning.

Divided between workers cleaning cleaning and washing the final product. From materials to products, to finished products through multi-channel processing, among a lot of work required during cleaning. Step different cleaning methods are slightly different. Product structure, the weight of different cleaning equipment are also differences, usually using ultrasonic cleaning and spray cleaning.

Now the mainstream bearing cleaning using kerosene, but with the environmental, health, safety and other aspects receive attention, many large hydrocarbon cleaning agent is accepted by customers, is also slowly promotion. Hydrocarbon cleaning agent with respect to the main features of kerosene, water-based cleaning agent is:

First, the good cleaning ability. Hydrocarbon cleaning agent with most anti-rust oil, machine oil, grease with non-polar petroleum fractions, hydrocarbon cleaning agent such mineral oil effect.

Second, the high boiling point. Natural state the amount of evaporation loss is small, less demanding on the packaging and sealing equipment.

Third, no residue after drying. Hydrocarbon cleaning agent is very pure solvent refining, drying can be completely volatile, no residue.

Fourth, non-toxic. Hydrocarbon cleaning agent inhalation toxicity, oral toxicity and low toxicity Dermal toxicity are not part of carcinogen, safe.

Fifth, the material compatibility. Hydrocarbon cleaning agent does not contain water and chlorine, sulfur corrosion of various metal material does not produce corrosion and oxidation.

Sixth, low viscosity, surface tension. Impregnation hydrocarbon cleaning agent is better, it is easy to be washed workpiece dipping narrow gap. Cleaning bearings, there is no dipping dead.

Seven, environmental protection. And instead of kerosene special cleaning agent, complex composition and contains certain aromatics, sulfur, chlorine and other corrosive for machinery, materials for human health hazards. Water-based cleaning agent on the cleaning effect of organic dirt poor, likely to have the active agent remaining on the bearing surface, easy to dry, good rust resistance, so when finished cleaning bearings generally do not use water-based cleaning agent after cleaning.

Conventional cleaning methods include ultrasonic cleaning, spray washing, rinsing and other means.